Crusher liner plate manufacturing process

*Some crusher parts customers will meet the drawing problems, for example the customer want to manufacturing process the crusher liner plate,While as the Chinese largest crusher lining plate manufacturer, crusher liner plate processing and measurement of

Rating: 4.9  (351  Ratings)  2584  views and hit

Some crusher parts customers will meet the drawing problems, for example the customer want to manufacturing process the crusher liner plate, and most lining plate plant will tell the customer they can not process without the drawings. While as the Chinese largest crusher lining plate manufacturer, YIHONG accumulated many experiences in processing and measurement of crusher liner plate, so YIHONG will tell you how to make a correct measurement for the crusher spare parts.

About the lining plate measuring problem for many using manufacture, YIHONG crusher accessories department point at that in fact it is easy to measure. Summary as follows(YIHONG crusher parts department technicist make a measurement to the customer sample crusher liner plate):

First, for a ring hammer crusher hammer. There are three size to measure for a ring hammer crusher liner plate:

1. crusher liner outer diameter;
2. the crusher liner inner circle diameter;
3. the thickness of the crusher liner.

In addition, we need measure crusher liner plate tooth crusher hammer size,the number of teeth and the bottom circle diameter of the teeth.

Second, for the same thickness top and bottom crusher liner plate, there are 6 six sizes to measure:

1. the crusher hammer shaft hole diameter;
2. the center height of the crusher liners;
3. crusher liner thickness;
4. the width of the crusher liner striking surface;
5. the total height of the crusher liner;
6. the radius of the bottom circle of crusher liner striking surface

Third, for the different thickness of top and bottom crusher liner plate, there are 8 sizes to measure:

1. the crusher hammer shaft hole diameter;
2. the center height of the crusher liners;
3. crusher liner Hammer handle thickness;
4. the thickness of the crusher liner striking surface;
5. the width of the crusher liner striking surface;
6. the height of crusher liner striking surface;
7. the total height of the crusher liner;
8. the radius of the bottom circle of crusher liner striking surface.

It need to point at that all the size should be millimeter when have a measurement. At the same time, dimensional tolerance of the Hammer axle hole diameter need in the light of the upper variation of tolerance, other size can be in the light of the lower variation of tolerance . If need know more about the the crusher liner plate measuring details, please consult the YIHONG Crusher accessories department.

Tag : Crusher liner plate,liner plate manufacturing,liner plate process